High precision measuring device enables absolute accurate adjustment of the cartridge´s diamond azimuth angle. Build in Phono-preamplifier and integrated headphone-output enables mobile usage. 100-240 V, 47-63 Hz.
azimuth optimizer approx. 750 g
power supply approx. 150 g
Silver
| Operating Voltage | 24 V DC stabilised with power supply Input: 100 - 240 V ~ / 47 - 63 Hz |
| In- and Outputs | RCA-sockets, unsymmetrically |
| Phono-unit | |
| Amplification | MM = 40 dB, MC = 60 dB |
| Channel separation | > 80 dB |
| Distortion factor | < 0,01% / 1 kHz |
| Input impedance/Capacity | MM = 47 kOhm / 220pF MC = 400 Ohm / 220pF |
| Output impedance | 100 Ohms |
| Frequency response | 20 Hz – 70 kHz / -3 dB |
| RIAA | RIAA ± 0.5 dB deviation |
| Headphone output | |
| Amplification | 10 dB |
| Headphone impedance | 100 – 600 Ohm |
| Connection | 6.3 mm-bushing |
| Measurement unit | |
| Indication range | -50 till +6 dB, accuracy ±0,2dB Gauge-measurement up to max. 19.99 mV |
| Noise filter | from 200 Hz / transconductance 12 dB per octave (valid only for right channel when unit is in measurement use) |
| Dimensions (H/W/D in mm) | 47 × 102 × 190 | Weight | azimuth optimizer: 750g Power supply: 150g |
| Garantie | 3 years* |
© 2024 Clearaudio | Alle Rechte vorbehalten | All rights reserved | Clearaudio electronic GmbH
Spardorfer Straße 150, 91054 Erlangen, Phone: +49 9131 - 40300100, Fax: +49 9131 - 40300119
Last update:
11-28-2024 Design by intACT
